You’re offline. This is a read only version of the page.
Supported certificate types and troubleshooting.
How to sanitize volatile and non-volatile memory on the AirCheck G2.
Number of test results that are buffered when unit is unable to connect to Link-Live.
How to find a Serial Number of any NetAlly product.
Sources that can cause interference.
Definition of supported EAP types for 802.1x authentication.
AP's detected at -100 dBm still show if below threshold.
The AirCheck G2 reports a lower signal level on the locate AP/Client screen than on the AP or Client information screens.
When running a connection tests, the PHY data rate can sometimes go blank.
NetAlly products examine and parse the first Layer 2 (CDP/LLDP/EDP/FDP) discovery packet.
How to configure an AirMapper Survey on the EtherScope nXG or AirCheck G2.
How to collect AirMapper data on the EtherScope nXG or AirCheck G2/G3
How to view AirMapper Survey heatmaps after uploading to Link-Live.
Table which outlines availability of various Link-Live features with and without AllyCare.
How to troubleshoot battery and power issues on the AirCheck G2.
Power limitations for Type A USB ports on the AirCheck G2.
Time Stamp in packet capture file from the AirCheck G2 is displayed in wrong time zone.
AirMapper .amp file name for use in AirMagnet Survey PRO.
A user may notice that the touch screen on the tester is registering an incorrect location. These are the steps to calibrate to improve accuracy.
Passive and Active Surveys within AirMapper
To Configure a Single Band in AirCheck G2.
Speed limitations when using iPerf or Ookla Speedtest.
An optional, purchased separately, battery pack that is available for the AirCheck G2.
Impact of Log4j security vulnerability on NetAlly products or websites
Maximum floor plan size.
How to capture and manage screenshots.
Limitations when running an iPerf test with UDP from an AirCheck G2.
How to reset a forgotten password on the Product Registration site.
Extending the life of the RJ45 Port on the LinkRunner AT units.
How to export troubleshooting log files from your AirCheck G2.
Feature comparisons between the AirCheck G3 and G2 units.
Enabling names for Cisco Access Points
AutoTest configuration and scenarios for the AirCheck G2.
How to configure proxy settings on the AirCheck G2.
How to import an AP alias List with AirCheck G2 manager.
Captive portal configuration and settings.
AirCheck G2 Manager Software and Windows compatibility.
How to add 802.1x authentication certificates.
Can the AirCheck G2 find an connect to hidden network SSIDs?
How to update the firmware/software on your AirCheck G2.
One-button AutoTest quickly provides a pass/fail indication of the Wi-Fi environment and identifies common problems.
How to create AP alias names for the AirCheck G2.